Featured Ford F-250 / F-350 4″ Lift Kit

2008-2018 4wd Performance Kit

Tuff Country’s Super Duty Ford 4″ performance lift kit features replacement radius arms that will rotate the front end to the proper caster.  This eliminates the need to use drop brackets to drop the factory radius arms.  This will make a huge difference to those Ford owners that often hit the trails and need all the ground clearance they can get. Allows up to 36″ tires and gives added fender clearance.

24975-tuff

Fits following years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

  • Replacement radius arms eliminate the need to drop radius arms
  • Allows use of up to 36″ x 12.5″ Tires
  • No loss loss of ground clearance due to use of radius arms
  • Limited Lifetime Warranty
  • Made in the USA

Featured  Ford F250/F350 2″ Lift Kit

2005-2018 4wd Models

Tuff Country EZ-Ride suspension 2.5″ lift kits for the Ford F250 & F350 allow for 33″ tires and gives additional fender clearance. The included upper coil springs spacers lift the front of the F250 / F350 without sacrificing ride quality. Also Includes rear add-a-leafs which are added to the existing leaf springs.

22980-tuff

Fits following years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

  • Upper coil springs spacers maintain a factory ride
  • Available with rear lift add-a-leafs
  • Bolt-on installation
  • Allows for up to 33″ tires
  • Limited Lifetime Warranty
  • Made in the USA

Vehicle Applications

 

Model Size W/O
Shocks
w/SX8000
Shocks
2017-2018 Ford F250 / F350 4wd w/Diesel Engine

Performance Kit
4″ 24987 24987KN
Instruction Manual: #24987 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Will not fit dually models
Vehicle Images:
2017-2018 Ford F250 / F350 4wd w/Gas Engine

Performance Kit
4″ 24989 24989KN
Instruction Manual: #24989 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Will not fit dually models
Vehicle Images:
2008-2016 Ford F250 / F350 4wd

Performance Kit
4″ 24975 24975KN
Instruction Manual: #24975 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Will not fit dually models
Vehicle Images:
2005-2018 Ford F250 / F350 4wd 2.5″ 22980 22980KN
Instruction Manual: #22980 Instructions
Average Install Time: 4 to 6 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are optional, not required. Some models will require a track bar drop bracket. Part #22971 for 2005-2007 models, #22972 for 2008-2012 models.
2008-2016 Ford F250 / F350 4wd

Performance Kit
4″ 24975 24975KN
Instruction Manual: #24975 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Will not fit dually models
Vehicle Images:
2008-2016 Ford F250 / F350 4wd 5″ 25975 25975KN
Instruction Manual: #25975 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Will not fit dually models
Vehicle Images:
EZ-Ride front coil springs are used to provide a comfortable ride. Proper alignment is maintained with the use of radius arm drop brackets, heavy duty track bar relocation bracket and a drop pitman arm.
2008-2016 Ford F250 / F350 4wd 6″ 26975 26975KN
Instruction Manual: #25975 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Will not fit dually models
2005-2007 Ford F250 / F350 4wd 5″ 24974 24974KN
Instruction Manual: #24974 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required
Vehicle Images:
2005-2007 Ford F250 / F350 4wd 6″ 26974 26974KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 37″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required
2000-2004 Ford F250 / F350 4wd w/460, V10 or Diesel Engine

Standard Kit
4″ 24955K 24955KN
Instruction Manual: #24955 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required.  Will not fit dually models. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
2000-2004 Ford F250 / F350 4wd w/gas 351 engine only 6″ 25921K 25921KN
Instruction Manual: #25921 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required.  Will not fit dually models. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
Vehicle Images:
2000-2004 Ford F250 / F350 4wd w/460, V10 or Diesel engine 6″ 25920K 25920KN
Instruction Manual: #25920 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required.  Will not fit dually models. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
Vehicle Images:
1997 Ford F-250 4wd w/diesel engine

Fits vehicles with 5 axle pivot mounting holes
2.5″ 22821K 22821KN
Instruction Manual: N/A
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Holes must be drilled into axle pivot brackets.
This affordable lift kit include leaf packs that are added the the existing leaf springs to lift the front end 2.5″.
1997 Ford F-250 4wd w/diesel engine

Fits vehicles with 5 axle pivot mounting holes
4″ 24821K 24821KN
Instruction Manual: #24821 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F-250 4wd w/diesel engine

With rear springs, fits vehicles with 5 axle pivot mounting holes
4″ 24823K 24823KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F250 4wd w/diesel engine

Fits vehicles with 5 axle pivot mounting holes
6″ 26821K 26821KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F250 4wd w/diesel engine

With rear springs, fits vehicles with 5 axle pivot mounting holes
6″ 26823K 26823KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F-250 4wd w/gas engine

Fits vehicles with 5 axle pivot mounting holes
2.5″ 22826K 22826KN
Instruction Manual: N/A
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Holes must be drilled in axle pivot brackets.
1997 Ford F-250 4wd w/gas engine

Fits vehicles with 5 axle pivot mounting holes
4″ 24833K 24833KN
Instruction Manual: #24833 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F-250 4wd w/gas engine

With rear springs, fits vehicles with 5 axle pivot mounting holes
4″ 24834K 24834KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F250 4wd w/gas engine

Fits vehicles with 5 axle pivot mounting holes
6″ 26833K 26833KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1997 Ford F250 4wd w/gas engine

With rear springs, fits vehicles with 5 axle pivot mounting holes
6″ 26834K 26834KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Holes must be drilled into axle pivot brackets.
1988-1996 Ford F-250 4wd w/diesel engine

Fits vehicles with 4 axle pivot mounting holes
2.5″ 22824K 22824KN
Instruction Manual: N/A
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Fits models with axle pivot brackets containing 4 mounting holes.
Tuff Country performance lift kits for the F-150 and Bronco include replacement radius arms.  These arms are longer which gives you better suspension articulation along with increased ground clearance.
1988-1996 Ford F-250 4wd w/diesel engine

Fits vehicles with 4 axle pivot mounting holes
4″ 24826K 24826KN
Instruction Manual: #24826 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F-250 4wd w/diesel engine

With rear springs, fits vehicles with 4 axle pivot mounting holes
4″ 24827K 24827KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F250 4wd w/diesel engine

Fits vehicles with 4 axle pivot mounting holes
6″ 26826K 26826KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F250 4wd w/diesel engine

With rear springs, fits vehicles with 4 axle pivot mounting holes
6″ 26827K 26827KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F-250 4wd w/gas engine

Fits vehicles with 4 axle pivot mounting holes
2.5″ 22825K 22825KN
Instruction Manual: N/A
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F-250 4wd w/gas engine

Fits vehicles with 4 axle pivot mounting holes
4″ 24828K 24828KN
Instruction Manual: #24828 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required.Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F-250 4wd w/gas engine

With rear springs, fits vehicles with 4 axle pivot mounting holes
4″ 24829K 24829KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F250 4wd w/gas engine

Fits vehicles with 4 axle pivot mounting holes
6″ 26828K 26828KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1988-1996 Ford F250 4wd w/gas engine

With rear springs, fits vehicles with 4 axle pivot mounting holes
6″ 26829K 26829KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.  Fits models with axle pivot brackets containing 4 mounting holes.
1980-1987 Ford F-250 4wd w/diesel engine 2.5″ 22820K 22820KN
Instruction Manual: N/A
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required
1980-1987 Ford F-250 4wd w/diesel engine 4″ 24820K 24820KN
Instruction Manual: #24820 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F-250 4wd w/diesel engine 4″ 24822K 24822KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F250 4wd w/diesel engine 6″ 26820K 26820KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F250 4wd w/diesel engine 6″ 26822K 26822KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F-250 4wd w/gas engine 2.5″ 22823K 22823KN
Instruction Manual: N/A
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 33″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required
1980-1987 Ford F-250 4wd w/gas engine 4″ 24824K 24824KN
Instruction Manual: #24820 Instructions
Average Install Time: 5 to 7 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F-250 4wd w/gas engine 4″ 24825K 24825KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 35″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F250 4wd w/gas engine 6″ 26824K 26824KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1980-1987 Ford F250 4wd w/gas engine 6″ 26825K 26825KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1986-1997 Ford F-350 4wd (standard cab only) 4″ 24830K 24830KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1986-1997 Ford F350 4wd (w/crew cab only) 4″ 24832K 24832KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.
1986-1997 Ford F350 4wd (standard & crew cab)

with rear leaf springs
4″ 24831K 24831KN
Instruction Manual: N/A
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 36″ x 12.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Vehicles equipped with 2 piece rear drive shafts require carrier bearing drop #20824.

The Tuff Country Difference

made-in-usa-icon
PRODUCTS PROUDLY MADE IN THE USA

Unlike most of our competitors, our products are not made overseas, but right here in the USA.   We sacrifice margins to bring the consumer a better product.


warranty-icon
OUR FOREVER GUARANTEE

The quality speaks for itself and we back it up. Our products include a Lifetime Warranty that gives you confidence when hitting the pavement or the trail.  Some limitations do apply.  (Details)


ez-ride-icon
RIDE QUALITY MATTERS TO US

Just because you have a lifted vehicle does not mean you ride quality has to be sacrificed.  Our lift kits and leveling kits are engineering to maintain a factory or near factory ride on most applications.


ez-install-icon
INSTALLATION MADE EASIER

Nobody ever said that suspension modifications where a piece of cake.  We engineer our suspension kits with ease of installation a key factor in the design.


since-89-icon
EXPERTS SINCE 1989

For over 25 years we have produced top quality suspension lift kits, leveling kits and other suspension components. Our experienced staff know truck suspensions inside and out.