Ford Ranger 3″ Lift Kit

2019 4wd

Our 3 inch suspension lift kit for the new 2019 Ford Ranger will allow for larger diameter tires and give a more aggressive look.  Featuring upper strut spacers, this lift kit is simple to install and maintains a factory ride. 1/2 inch rear block and extended ubolts are used to lift the rear end, which will give the Ranger a level stance.

  • Allows use of larger tires
  • 3 inch front lift / .5 inch rear lift
  • Upper strut spacers maintain a factory ride
  • Limited Lifetime Warranty
  • Made in the USA

Ford Ranger Performance 4″ Lift Kit

1983-1997 4wd

This performance lift kit for the Ford Ranger includes extended radius arms for improved articulation & tire clearance. EZ-Ride coil springs lift the front end, add-a-leafs are used in the rear. Alignment is maintained using radius arm drop brackets, axle pivot brackets and sway bar drop brackets.

Ford Ranger 4 inch Performance Lift Kit

  • Extended radius arms improve articulation and tire clearance
  • Axle pivot brackets include camber adjustment bolts for precise alignment
  • Additional tire clearance for 31 inch tires
  • Limited Lifetime Warranty
  • Made in the USA

 

Vehicle Applications

Model Years Size W/O
Shocks
W/SX6000
Shocks
(Hydraulic)
W/SX8000
Shocks
(Gas)
Ford Ranger 4wd 2019 3″ 23105 N/A 23105KN
Instruction Manual: 23105 Instructions
Average Install Time: 3 to 5 Hours
Recommended Tire Size: 31 x 10.5
Rim Backspacing: Wider tires than stock will require additional wheel backspacing
Install Notes: New shocks are NOT required.
Ford Ranger 4wd

Standard Kit
1983-1997 4″ 24860K 24860KH 24860KN
Ford Ranger 4 inch Lift Kit
Instruction Manual: #24860 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 31″ x 10.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Ford Rangers with 2 piece rear drive shafts may require carrier bearing drop bracket #20819.
Ford Ranger 4wd

Performance Kit
1983-1997 4″ 24865K 24865KH 24865KN
Ford Ranger 4 inch Performance Lift Kit
Instruction Manual: #24865 Instructions
Average Install Time: 6 to 8 Hours
Recommended Tire Size: 31″ x 10.5″
Rim Backspacing: Standard
Install Notes: New shocks are required. Ford Rangers with 2 piece rear drive shafts may require carrier bearing drop bracket #20819. Performance kits include extended radius arms.

The Tuff Country Difference

made-in-usa-icon
PRODUCTS PROUDLY MADE IN THE USA

Unlike most of our competitors, our products are not made overseas, but right here in the USA.   We sacrifice margins to bring the consumer a better product.


warranty-icon
OUR FOREVER GUARANTEE

The quality speaks for itself and we back it up. Our products include a Lifetime Warranty that gives you confidence when hitting the pavement or the trail.  Some limitations do apply.  (Details)


ez-ride-icon
RIDE QUALITY MATTERS TO US

Just because you have a lifted vehicle does not mean you ride quality has to be sacrificed.  Our lift kits and leveling kits are engineering to maintain a factory or near factory ride on most applications.


ez-install-icon
INSTALLATION MADE EASIER

Nobody ever said that suspension modifications where a piece of cake.  We engineer our suspension kits with ease of installation a key factor in the design.


since-89-icon
EXPERTS SINCE 1989

For over 25 years we have produced top quality suspension lift kits, leveling kits and other suspension components. Our experienced staff know truck suspensions inside and out.